Sea Port Model Works
  Home Page » Catalog » H160-HO My Account  |  Cart Contents  |  Checkout   
Printable Catalog
About us
Privacy Notice
Featured Products
Contact Us
H160-HO 51' Western Rigged Dragger - SPMW Craftsman

SPMW Craftsman Kit


 51' Western Dragger Kit H160 is one fabulous resin kit!

Length: 7-1/4" Width: 2-3/8 " 

This kit will be limited in production to 250 . 

*Note:  Kit not subject to any promotional discount. People figures not included.

 Our new 51' Western Dragger waterline kit is supplied with a hollow resin hull, etched brass ladders & railings, resin pilot house, and high quality pewter & resin fittings/castings, many of which have been designed specifically for this kit.

 This kit is designed to give the modeler the best advantages in building and finishing a terrific model. All of the original patterns were made in our shop with reference to the details of several prototypes and much research in books, museums, photographs and conversations with master modelers.

 The modeler has a great chance to weather and configure the vessel as having done some serious work or in pristine condition just after being launched. Some part modification (sanding or filing) might be required on the wood, resin & metal parts for satisfactory fit.

 All of our resin parts are hand molded from high quality resin that is tough, durable, machinable, and paintable.

 Our Craftsman kits are freelance designs that incorporate features from some prototype vessels.

No model shipbuilding skills are required for our kits. Kits include all parts necessary for assembly,

 as well as detailed drawings, instruction sheets and finishing instructions.

 Brief history of the Western-rig or Stonington draggers:

 Fishing schooners and Eastern-rig draggers that evolved from the schooners had deck & helm arrangements that had changed little since the earliest days of sail. With engine power came pilothouses, but auxiliary schooners and Eastern-rigged vessels still kept the helm, at the stern of the vessel, where it was close to the rudder. However as fishing became more powered the pilot houses could be placed anywhere on the deck.

               In the 1920s Western-rig draggers, having pilot houses forward, were becoming popular along coastal Connecticut and then into New Bedford. For many years these vessels continued to fish by lowering their nets over the sides. It wasn’t until after World War II that the Net reel and stern dragging caught on the West Coast USA. It wasn’t until after the early 1960s that the net wheel stern dragger became an east coast vessel.

 This is how you would go fishing in this trawler, or any trawler for that matter.

 The boat slows to 1 or 2 knots. The net is unreeled off the net wheel. Net wheel is hydraulically operated. Once the net is in the water a crew man attaches the “wings” of the net to the “doors”. Once the doors are attached the crew men simultaneously release the brakes on both main winches. Both doors will now enter the water at the same time.

               The heavy doors drag the net to the ocean bottom while the vessel is still moving forward until they sense the net & doors have made it to the bottom. They then apply the brakes to the winches and start dragging the net along the ocean bottom

               Once the net is deemed “full of fish” the winches draw in the cable until the doors come up to the blocks on the gallows frames. The doors get chained to an eye on the gallows frames. The crew take a line from the “wings” on the net and tie them to the net reel. They start drawing in the net onto the net reel until the “cod end” (the part where all the fish are) has come to the surface. 

               The crew now connects the “Gilson hook” (attached to the hauling boom) on to the end and hoists it aboard the vessel. The checkerboards are set at the stern ramp etc. to contain the catch. They empty the cod end onto the deck. Fish are now sorted, cleaned & iced down, and the crew either reset the net or reel it onto the net reel. Done fishing!   The Western-rig dragger was also adopted by the scalloping fleet. They do not need the net reel as they merely drop dredges over the stern of the vessel and hauled.        


This product was added to our catalog on Saturday 17 November, 2018.
Customers who bought this product also purchased
P26-HO - Metal Fire Hose Coil W. 3/8" (3 pack)
P26-HO - Metal Fire Hose Coil W. 3/8" (3 pack)
P212-HO Sylvan Channel Marker Buoy Kit-H. 1-1/2" W. 1-7/8" 2pk
P212-HO Sylvan Channel Marker Buoy Kit-H. 1-1/2" W. 1-7/8" 2pk
P6 Brass Cleats Scale: N, HO, O.  W. 1/8" H. 3/16" 8 pc.
P6 Brass Cleats Scale: N, HO, O. W. 1/8" H. 3/16" 8 pc.
H163-1 HO Launch - NEW RELEASE! L: 2  in.
H163-1 HO Launch - NEW RELEASE! L: 2 in.
P188-HO Brass Loran/Radar Antenna - .017 thick dia. 5/32"
P188-HO Brass Loran/Radar Antenna - .017 thick dia. 5/32"
P177-HO Radar Unit - W. 3/8" H. 1/4" (3 pk)
P177-HO Radar Unit - W. 3/8" H. 1/4" (3 pk)
Shopping Cart more
0 items
Modelers Gallery
Show Schedule
Contact Us
Quick Find

Copyright © 2020 Sea Port Model Works
Powered by using osCommerce